Home • Bath • Toilet Seats • Slow Close Toilet Seat • Slow Close Elongated Toilet Seat By Bemis
  • Our Toilet Seat Collections from Bemis and Mayfair aren't just for "designer" bathrooms. Adding your favorite design gives a fresh, fun twist to your current bathroom,
  • Our line of specialty molded wood toilet seats, Acrylic toilet seats and Soft Cushioned toilet seats can be used as standard size and elongated replacement toilet seats for these major manufacturers: American Standard, Church, Crane, Kohler, Eljer, Briggs, Bemis, Artesian, Kilgor, Mayfair, Mansfield, Norris, Universal Rundle, Peerless, and Western Pottery
  • Installation Tips:
    You don't have to be a licensed plumber to install a toilet seat. It's easy!
  • Typically, the most difficult job of replacing a seat is removing the old one, but with a standard wrench, a screwdriver and a spray can of WD-40® penetrating oil, you'll find it quite easy.
  • To remove your old seat, loosen the hinge with a screwdriver or wrench. Remember your tools are steel and your bowl is porcelain, so be careful not to chip it. If the bolts are rusty or badly calcified, spray them with WD-40® penetrating oil. Let them sit for five or ten minutes and then try again. If they still won't budge, you might want to consider calling a professional.
  • Next, refer to the installation instructions included with your toilet seat or use the links below.
  • If your toilet seat comes with a double-adhesive washer, you should first affix it to the bottom of the hinge. Then place the seat on the porcelain and simply insert the bolts into the holes provided and tighten with a standard screwdriver. Retighten after a few days.
  • AS SEEN ON HGTV - I WANT THAT BATHS
  • Slow Close Elongated Toilet Seat By Bemis
    Click to Enlarge

    Slow Close Elongated Toilet Seat By Bemis

    Tired of being awakened in the middle of the night by a slamming toilet seat? Installing a soft close toilet seat by Bemis eliminates this problem. Soft close toilet seats activate by a simple push from your finger. The seat closes gently on its own until landing softly on the toilet bowl. Households with small children will also appreciate the soft close seat by Bemis as it prevents injury to tiny hands common with traditional seats. Soft close seats reduce the amount of handling during closing compared to traditional seats, providing a higher degree of protection from infectious disease associated with toilet seats. The high quality seats install easily with common household tools. The Easy-2-Clean lift off hinge system allows easy access for cleaning the hard to reach areas around the toilet seat hinge area. The slow close elongated toilet seat by Bemis will provide years of maintenance free service.

    • Heavy weight and injection molded of solid plastic. Closed front with cover for regular bowl and feature large molded-in bumpers. Color matched hinges contain stainless steel pintles, non-corrosive top tightening bolts, wing nuts, no-slip washers with Slow-Close™ and Lift-Off™ features. The "locked-in" hinge design prevents wobbling. The molded-in bumpers provide easy cleaning.
    • Ring thickness is 5/8" Ring thickness including the bumper is 7/8" Height of the seat with cover is 2-7/16"
    • Bemis 200 Slow Elongated Toilet Seat Features Easy-2-Clean™ Lift-Off Hinge
    • Color: Bisquit
    • Size: Elongated
    • Click Here for Toilet Seat Size chart

    Be the first to rate and review item(s) on this page. Click the "rate this item" button next to an item below.


    Bookmark and Share
    ItemShips InPriceQuantity
    White Slow Close Elongated Toilet Seat By Bemis
    White Slow Close Elongated Toilet Seat By Bemis
    Item = 120slow-white
    Elongated 18.5" x 14.25" x 2.16" (l x w x d)
    Usually ships in 2-3 business days
    Our Price: $54.99
    Compare at: $75.00
    You Save: $20.01 (27%)
    Bisquit Slow Close Elongated Toilet Seat By Bemis
    Bisquit Slow Close Elongated Toilet Seat By Bemis
    Item = 120slow-bisquit
    Elongated 18.5" x 14.25" x 2.16" (l x w x d)
    Usually ships in 2-3 business days
    Our Price: $54.99
    Compare at: $75.00
    You Save: $20.01 (27%)

    What does "Compare at" mean?

    The term "Compare at" means the price at which an item or comparable item may, in the reasonable judgment of our experienced buyers, be sold on an everyday basis. (i.e. excluding special promotions or sales) at retail stores. In the case of factory serviced items, the "Final Sale" price reflects the retail price of that item, if new. For our items that are sold in a set, the "Compare at" price reflects the retail price of each individual item if sold separately.


    You may wish to use the "Compare at" price as a guide in your evaluation of our prices. Because we sell our merchandise over the internet on a national basis, and because some of the items offered by BedBathStore.com are closeouts, overstocks, end-of-season or otherwise remainder inventory, it is not possible to know if our merchandise is sold at the "Compare at" price in any particular location or at any particular time. Comparative prices may be used as an approximate guide as to what you would or could have paid elsewhere.

  • Our Toilet Seat Collections from Bemis and Mayfair aren't just for "designer" bathrooms. Adding your favorite design gives a fresh, fun twist to your current bathroom,
  • Our line of specialty molded wood toilet seats, Acrylic toilet seats and Soft Cushioned toilet seats can be used as standard size and elongated replacement toilet seats for these major manufacturers: American Standard, Church, Crane, Kohler, Eljer, Briggs, Bemis, Artesian, Kilgor, Mayfair, Mansfield, Norris, Universal Rundle, Peerless, and Western Pottery
  • Installation Tips:
    You don't have to be a licensed plumber to install a toilet seat. It's easy!
  • Typically, the most difficult job of replacing a seat is removing the old one, but with a standard wrench, a screwdriver and a spray can of WD-40® penetrating oil, you'll find it quite easy.
  • To remove your old seat, loosen the hinge with a screwdriver or wrench. Remember your tools are steel and your bowl is porcelain, so be careful not to chip it. If the bolts are rusty or badly calcified, spray them with WD-40® penetrating oil. Let them sit for five or ten minutes and then try again. If they still won't budge, you might want to consider calling a professional.
  • Next, refer to the installation instructions included with your toilet seat or use the links below.
  • If your toilet seat comes with a double-adhesive washer, you should first affix it to the bottom of the hinge. Then place the seat on the porcelain and simply insert the bolts into the holes provided and tighten with a standard screwdriver. Retighten after a few days.
  • AS SEEN ON HGTV - I WANT THAT BATHS
  • To Place an order 24 Hours a day, Call Toll Free 866.640.2400 © 2012 BedBathStore.com LLC. All rights reserved.

    ecommerce provided by Yahoo! Small Business Yahoo! Shopping Ratings Nextag Seller BizRate Customer Certified (GOLD) Site - Bedbathstore.com Reviews at Bizrate BedBathStore.com is upfront